Bulk #10-32 Phillips Flat Taptite Alternative Thread-Rolling Screws – Zinc Bake + Wax – Monster Bolts Panhead allowing better wrench engagement and

allowing better wrench engagement and reduced slippage

Finish: Zinc Yellow CR+6 Plating (5 microns thick)

Drive: Phillips #2 cross recess—works with manual

The metal is passivated & wax-coated for a clean surface

8UN Thread Series: 1-1/8"-8

Bulk #10-32 Phillips Flat Taptite Alternative Thread-Rolling Screws – Zinc Bake + Wax – Monster Bolts Panhead allowing better wrench engagement andMonster Overview: Achieve a flush, vibration resistant joint with #10 32 Phillips Flat Head Taptite Alternative Screws from Monster Bolts. The tri lobular thread rolling point forms precise internal threads on drive inno tapping, no chipswhile the 82 countersunk head sits perfectly flush for snag free surfaces. Each case hardened steel fastener is CR+3 clear zinc plated, bake relieved to remove hydrogen embrittlement, then finished with a factory dry